1.金属本构理论与测量技术

2.塑性成形多尺度建模分析

3.材料变形与断裂机制

金属塑性成形材料模型的实验测量与程序实现（本科）

1.国家自然科学基金面上项目（52175322），考虑应变路径相关性的GP区强化铝合金板材机器学习本构模型，2022.01-2025.12

2.铝合金薄壁类零件的半固态流变铸造技术（应用示范类）-基于半固态流变成形的高性能铝合金设计（2018YFB2001800），国家重点研发计划(制造基础技术与关键部件)课题（2018YFB2001801），2019.07-2022.06

3.基于精准局域组织预控制的镁合金复杂冲压件的成形及组织性能演变规律，国家自然科学基金-山西煤基低碳联合基金（U1810208）子课题，2019.01-2022.12。

4.汽车铝合金锻件高温精密锻造成型技术开发，吉林省科技厅技术攻关项目（20190302059GX），2019.01-2021.12。

5.基于有限元辅助试验技术的板材成形极限精确研究，国家自然科学基金面上项目（51575230），2016.01~2019.12。

1.Jin-Zhao Li, Zhi-Ping Guan*. A re-evaluation of super-high ductility mechanism in superplastic uniaxial tension. International Journal of Mechanical Sciences, 2025, 289:110059.

2.Yu-Lei Ying, Zhi-Ping Guan*, Kai Guan*, Pin-Kui Ma, Wei Yan, Gang Wang. Tension/Compression Difference in Creep Resistances of Wrought Mg-Zn-Based Alloy with Icosahedral Quasicrystal Phases. Metals and Materials International. 2025, 31:60–69

3.Yi-Hang Yang, Hai-Long Jia*, Can Wang, Wei Liu, Min Zha, Pin-Kui Ma, Zhi-Ping Guan*, Hui-Yuan Wang. An innovative strategy to prepare fine-grained Mg-Al alloys with a superior strength-ductility synergy via wire-arc directed energy deposition. Additive Manufacturing, 2024, 86:104207

4.Yi-Hang Yang, Zhi-Ping Guan*, Pin-Kui Ma, Ming-Wen Ren, Hai-Long Jia*, Po Zhao, Min Zha, Hui-Yuan Wang. Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties, Journal of Magnesium and Alloys, 2024, 12(12):5024-5037

5.Yu-Lei Ying, Zhi-Ping Guan*, Xuan Wang*, Gang Wang, Wei Yan. Room temperature tensile creep behavior of Mg-6Zn-0.4Mn-0.3Al-0.2Ca(wt.%) alloy containing icosahedral quasicrystals. Materials Today Communications, 2024, 39:108602

6.Yu-Lei Ying, Zhi-Ping Guan*, Xuan Wang*, Gang Wang, Wei Yan. Creep behaviors of Mg–6Zn-0.4Mn-0.3Al-0.2Ca (wt.%) alloy enhanced by icosahedral quasicrystal. Materials Science and Engineering A, 2024, 892:146060

7.Ming-Yu Li, Zhi-Ping Guan*, Peng Chen*, Ming-Wen Ren, Gang Wang, Wei Yan, Po Zhao, Jia-Wang Song. Anisotropic strain hardening in an extruded lean Mg-Al-Ca-Mn alloy. Materials & Design, 2024, 239:112770

8.Ming-Yu Li, Zhi-Ping Guan*, Li-Ping Liu, Hong-Jie Jia, Zhi-Gang Li, Ming-Hui Wang, Pin-Kui Ma*, Jia-Wang Song. Investigation of enhanced strength anisotropy in an extruded Mg–Al–Ca–Mn alloy at cryogenic temperature. Materials Science and Engineering A, 2024, 890:145940

9.Xian Wu, Xu Liu*, Xuan Wang, Pin-Kui Ma, Zhi-Ping Guan*. Effect of Cu and Sn additions on the thermal stability of Al–Mg–Si alloy, Materials Science and Engineering A, 2024, 894:146158

10.Xian Wu, Zhi-Ping Guan*, Zhi-Zheng Yang, Xuan Wang*, Feng Qiu, Hui-Yuan Wang. Effect of Cu content on central-segregation composition and mechanical properties of Al–Mg–Si alloys produced by twin-roll casting. Materials Science and Engineering: A, 2023, 869:144782

11.Zhi-ping Guan, Ming-yu Li, Kai-xin Xia, Zhi-gang Li, Dan Gao, Po Zhao, Pin-kui Ma, Jia-wang Song*. Microstructure, mechanical properties and wear resistance of SiCp/AZ91 composite prepared by vacuum pressure infiltration, Transactions of Nonferrous Metals Society of China, 2022, 32(1):104-121