Male

Professor

Institute of superplasticity and plasticity

graduate student

Doctor of Engineering

：

Fundamentals of material forming technology（undergraduate）

Lightweight materials and lightweight technology（undergraduate）

Continuous local plastic forming process and equipment (Graduate)

2003.09-2010.06，Jilin University，School of materials science and Engineering，Doctor of Engineering.

2000.09-2003.06，Jilin University，School of materials science and Engineering，Master of Science in Engineering.

1996.09-2000.06，Jilin University，School of materials science and Engineering，Bachelor of Science.

2020.09-Present Professor, School of materials science and engineering, Jilin University

2015.03-2016.03，Visiting scholar, University of Michigan, USA

2011.09-2020.09，Associate Professor, Institute of superplasticity and plasticity, Jilin University

2006.09-2011.09，Lecturer, Institute of superplasticity and plasticity, Jilin University

2000.07-2006.09，Assistant, Institute of superplasticity and plasticity, Jilin University

[1] NSFC regional joint fund(Sub project), Design of novel low-alloy superplastic magnesium alloy for vehicles and its microstructure control mechanisms-3, 2020.01-2023.12, study in progress.

[2] Jilin Provincial Department of education, Industrialization of low VOC hemp fiber reinforced polymer matrix composites, 2019.01-2020.12，study in progress，Person in charge.

[3] Enterprise project, Preparation and key technology development of multi-component fiber reinforced composite，2018.09.-2019.06，completed study，Person in charge.

[4] Jilin Province major scientific and technological achievements transformation project (sub project), Industrialization of polymer based hemp fiber reinforced composites and parts for automobile，2016/01-2018/12，study in progress，Person in charge.

[5] Natural science foundation(general project), Research on the bionic sound absorption mechanism of automobile acoustic packaging coupling and its influence on interior noise，2016.01-2019.12，completed study，participant.

Academic papers：

[1] Zhigang Li, Xinpei Wei, Junhui Liu, Hongjiang Han, Hongjie Jia, Jiawang Song*. Mechanical properties and VOC emission of hemp fibre reinforced polypropylene composites: Natural freezing-mechanical treatment and interface modification[J]. Fibers and Ploymers, 2021,22(3):1-13.

[2] Zhigang Li, Zhongxiang Guan, Zhiping Guan, Ce Liang*, Kaifeng, Yu*. Preparation of Cryogenic Carbon Derived from Hemp Stems as Anode for Lithium-ion Batteries[J]，Nanoscale Research Letters,2020,15:193.

[3] Zhigang Li, Xinpei Wei, Zhipeng Gao, Jin Xu, Pinkui Ma, Minghui Wang*. Manufacturing and mechanical characterisation of polyurethane resin based sandwich composites for three-dimensional fabric reinforcement[J]，Materials Today Communications. 24 (2020) 101046.

[4] Guan Zhongxiang, Guan Zhiping, Li Zhigang*, Liu Junhui, Yu Kaifeng. Characterization and Preparation of Nano-porous Carbon Based on Hemp Stems as Anode for Lithium-ion Batteries[J]. Nanoscale Research Letters, 2019,14（1）:338.

[5] Zhigang Li, Junhui Liu, Zhipeng Gao, Zhiping Guan*. Preparation of environmentally friendly hemp fiber reinforced polylactic acid composites[J].Journal of Jilin University（Engineering and technology edition）, 2019, 46（2）536-543.

[6] Liu Junhui, Guan Zhiping，Li Zhigang*. Application of cryogenic and mechanical treatment in degumming of hemp stems[J].Biosystems Engineering（BIOSYST ENG）, Volume 174, October 2018, 144-152.

Authorized patents in China：

[1] Zhigang Li, Hao Jiang, Huiyuan Wang, Min Zha, Cheng Wang, Hongjiang Han, Po Zhao, Hongjie Jia, An asymmetric continuous large deformation extrusion method for magnesium alloy, Patent number: ZL2019100229013, 2020-07-10.

[2] Zhigang Li, Xueqiang Liu, Hongjiang Han, Pinkui Ma, Jin Xu, A 3D printing wire reinforced by natural hemp fiber and its preparation method, Patent number: ZL201611145849.3, 2018-08-14.

[3] Zhengdong Ma, Zhigang Li, Guoqing Xiao, Ze Zhou, A micro structure bionic composite board based on hemp fiber composite，Patent number: ZL2016 1004 4304.7, 2018-02-06.

[4] Zhigang Li, Hongjiang Han, Xueqiang Liu, Jin Xu, Pinkui Ma, A combined cryogenic -mechanical degumming method for hemp fiber，Patent number: ZL201611143590.9, 2018-09-11.

[5] Zhigang Li, Xinpei Wei, Xueqiang Liu, Huiyuan Wang, Hongjie Jia, Jin Xu, Hongjiang Han, Dan Gao, A kind of high performance environmental protection basalt fiber / hemp fiber reinforced resin composite automobile ceiling interior trim panel and its preparation method，Patent number: ZL201910022900.9, 2020-07-07.

[6] Zhigang Li, Hongjie Jia, Junhui Liu, Xueqiang Liu, Pinkui Ma, Jin Xu, Mingwen Ren, Minghui Wang, Jiawang Wang, A process of molding and rolling for natural hemp fiber reinforced composites, Patent number: ZL201811182019.7, 2020-07-28.

[1] Zhigang Li(5/15), Preparation and application of polymer based hemp fiber reinforced composites for automobile，Jilin Province Science and Technology Award (technological invention), First prize, 2015-10-23.

[2] Zhigang Li(3/15), Preparation and application of blend Thermopolymer based hemp fiber reinforced composites, China Textile Industry Federation science and technology progress award, First prize, 2017.11.

First things,first！