ENGLISH 设为首页 加入收藏
首页 > 师资队伍 > 阅读征文
师资队伍
沈平
基本情况
姓名: 沈平
性别:
职称: 教授
所在系别: 材料加工工程系
是否博导:
最高学历: 研究生
最高学位: 博士
电话:
Email:
详细情况
所在学科专业: 材料加工工程
所研究方向: 金属-陶瓷的润湿与连接(钎焊);轻质高强韧仿生复合材料;先进材料的合成
讲授课程: 材料成型及控制工程专业外语/必修课 本科生 56学时 (春学期)
材料的界面/选修课 本科生 24学时 (春学期)
液态成型研究新进展 本科生 2/24学时 (秋学期)
科技论文写作 研究生 20/40学时 (秋学期)
材料加工工程博导专题讲座 研究生 2/24学时 (秋学期)
教育经历: 1991.09 -1995.07 吉林工业大学 金属材料工程系焊接专业 学士
1995.09 -1998.04 吉林工业大学 材料加工工程专业 硕士
1998.08 -2001.10 吉林大学 材料加工工程专业 博士
工作经历: 2001.11-2002.10 日本大阪大学接合科学研究所 客员研究员(博士后)
2002.11-2004.03 日本大阪大学接合科学研究所 讲师 特任教员(COE)
2004.04-2005.04 日本大阪大学接合科学研究所 特任研究员
2005. 10-至今 吉林大学材料科学与工程学院 教 授 (破格)
2006. 06-至今 吉林大学材料科学与工程学院 博士生导师
科研项目: 1) 基于冰模板构筑仿珍珠贝结构的高强韧金属-陶瓷复合材料,国家自然科学基金面上项目(No. 51571099), 2016.01-2019.12,负责人。
2) 电流作用下电子/离子导电系固-液界面的润湿、传质与结构演变,国家自然科学基金面上项目(No. 51271085), 2013.1-2016.12,负责人。
3) 锡钎料在亚稳结构表面的润湿行为与微观机制,国家自然科学基金面上项目(No. 51071076), 2011.1-2013.12,负责人。
4) 熔融镁在陶瓷上的润湿及蒸发和晶体取向的影响,国家自然科学基金面上项目(No. 50871045), 2009.1-2011.12,负责人。
5) 锡基无铅钎料的润湿性与界面化学,教育部新世纪优秀人才支持计划(No. NCET-07-0360),2008.1-2010.12,负责人。
6) 先进金属基复合材料制备科学基础-先进金属复合材料可控复合制备理论((No. 2012CB619602),科技部973项目, 2012.1-2016.12,子项负责人。
7) 活性非晶钎料与陶瓷的润湿行为及界面结构特征,哈工大先进焊接与连接国家重点实验室重点项目基金(AWPT-Z03),2011-2013.负责人
学术论文: 2012年
1. Laixin Shi, Ping Shen, Dan Zhang, Erting Dong, Qichuan Jiang, “Wetting of (0001) a-alumina single crystals by molten Mg–Al alloys in the presence of evaporation”, J Mater Sci, DOI 10.1007/s10853-012-6784-5
2. Shenbao Jin, Ping Shen, Dongshuai Zhou, Qichuan Jiang, “A Common Regularity of Stoichiometry-Induced Morphology Evolution of Transition Metal Carbides, Nitrides, and Diborides during Self-Propagating High-Temperature Synthesis” Crystal Growth & Design 12(6) (2012) 2814-2824, DOI: 10.1021/cg201604z
3. Shenbao Jin, Ping Shen, Yanjun Li, Dongshuai Zhou, Qichuan Jiang, “Synthesis of spherical NbB2-x particles by controlling the stoichiometry”, CRYSTENGCOMM, 14(6)(2012) 1925-1928, DOI: 10.1039/c2ce06436g
4. Binglin Zou, Ping Shen, Xueqiang Cao, Qichuan Jiang, The mechanism of thermal explosion (TE) synthesis of TiC–TiB2 particulate locally reinforced steel matrix composites from an Al–Ti–B4C system via a TE-casting route, Materials Chemistry and Physics 132 (2012) 51– 62
5. Feng Qiu, Ping Shen, Chang Liu, Qichuan Jiang, “Effects of Ni addition on the microstructure and compressive deformation behavior in Zr-Cu-Ni martensitic alloys,” Materials and Design, 34 (2012) 143–147.
6. Feng Qiu, Ping Shen, Tao Liu, Qichuan Jiang, “Enhanced ductility in a Zr65Cu15Al10Ni10 bulk metallic glass by nanocrystallization during compression,” Materials & Design, 36(2012) 168-171, DOI: 10.1016/j.matdes.2011.10.034
7.Ping Shen, Jun Yang, Zhongfa Yin, Jianxin Sun and Qichuan Jiang, “Wetting of amorphous and nanocrystalline Ni75B15Si10 substrates by molten Sn”, Surf. Interface Anal. (2012) DOI 10.1002/sia.5159.
8. Longlong Yang, Ping Shen, Xiaoshuang Cong, Qichuan Jiang, “Wetting and reaction of molten La with poly- and mono-crystalline MgO at 1323 K,” J. Mater. Sci., DOI 10.1007/s10853-012-6821-4.



2011年
1. Qiaoli Lin, Ping Shen*, Longlong Yang, Shenbao Jin, Qichuan Jiang, “Wetting of TiC by molten Al at 1123–1323 K” Acta Mater., 59 (2011) 1898–1911.
2. Yanwei Zhao, Yujin Wang, Yu Zhou, Ping Shen, “Reactive wetting and infiltration of polycrystalline WC by molten Zr2Cu alloy,” Scripta Materialia, 64 (2011) 229–232.
3. Ping Shen, Jianxin Sun, Jun Yang, Yan Qi and Qichuan Jiang, “Wetting of amorphous and nanocrystalline Fe78B13Si9 substrates by molten Sn and Bi,” Nanoscale Research Letters 2011, 6:318; doi:10.1186/1556-276X-6-318
4. Ping Shen*, Xiaohong Zheng, Feng Qiu, Qichuan Jiang, et al., ;Temperature dependence of the wettability between glass forming alloy Zr55Cu30Al10Ni5 and polycrystalline ZrO2,; Journal of the American Ceramic Society, 94(7)(2010) 2162-2170.
5. Longlong Yang, Ping Shen*, Qiaoli Lin, Feng Qiu, Qichuan Jiang, “Effect of Cr on the wetting in Cu/graphite system”, Applied Surface Science 257 (2011) 6276–6281.
6. Qiaoli Lin, Ping Shen*, Longlong Yang, Feng Qiu and Qichuan Jiang, “Warping of triple line in the wetting of B4C by a Cu-1 at.% Cr alloy”, Surface and Interface Analysis, 2011,43, 1360–1364.
7. Lei Zhan, Ping Shen, Qichuan Jiang, “The mechanism of combustion synthesis of (TiCxNy-TiB2)/Ni from a Ni-Ti-C-BN system” Powder Technology, 205 (2011) 52–60.
8. Binglin Zou, Ping Shen, Xueqiang Cao, Qichuan Jiang, “Reaction path of the synthesis of a-Al2O3-TiC-TiB2 in an Al-TiO2-B4C system,” International Journal of Refractory Metals and Hard Materials, 29(2011), 591-595.
9. Dan Zhang, Ping Shen*, Laixin Shi, Qichuan Jiang, “Wetting of B4C, TiC and graphite substrates by molten Mg,” Materials Chemistry and Physics, 130 (2011) 665–671.
10. Laixin Shi, Ping Shen*, Dan Zhang, Qichuan Jiang, Pinning-depinning behavior in the wetting of (0001) a-Al2O3 single crystal by molten Mg, Applied Surface Science, 257 (2011) 10743-10747.
11. Shenbao Jin, Ping Shen, Dongshuai Zhou and Qichuan Jiang, “Self-propagating high-temperature synthesis of nano-TiCx particles with different shapes by using carbon nano-tube as C source,” Nanoscale Research Letters 2011, 6:515.
12. Laixin Shi, Ping Shen*, Dan Zhang, Qichuan Jiang, “Wetting and evaporation behaviors of molten Mg–Al alloy drops on partially oxidized a-SiC substrates,” Materials Chemistry and Physics, 2011,130:1125-1133.
13. Jinliang Song, Quangui Guo, Zechao Tao, Xiaoqing Gao, Ping Shen, Jingli Shi, Lang Liu, “Mo2C intermediate layers for graphite–Cu system using the molten salt method,” Fusion Engineering and Design, 2011,86(12):2965-2970.


2010年
1. Shenbao Jin, Ping Shen, Qiaoli Lin, Lei Zhan, Qichuan Jiang, “Growth mechanism of TiCx during SHS in an Al-Ti-C system”, Crystal Growth & Design, 2010, 10, 1590-1597.
2. Ping Shen*, Jianxin Sun, Jun Yang, Qichuan Jiang, “Effect of substrate annealing on the wetting of metastable BNi-2 ribbons by molten Sn,” Journal of Applied Physics, 2010; 107, 094901.
3. Ping Shen*, Dan Zhang, Qiaoli Lin, Laixin Shi, Qichuan Jiang, “Wetting of polycrystalline MgO by molten Mg under evaporation”, Materials Chemistry and Physics, 122 (2010) 290–294.
4. Longlong Yang, Ping Shen*, Qiaoli Lin, Feng Qiu, Qichuan Jiang, “Wetting of porous graphite by Cu-Ti alloys at 1373 K”, Materials Chemistry and Physics, 124 (2010) 499–503.
5. Dan Zhang, Laixin Shi, Ping Shen*, Qiaoli Lin, Qichuan Jiang, “Evaporation-coupled wetting of ZrO2 by molten Mg in Ar atmosphere”, Applied Physics A, 2010, 98, 601–607.
6. Ping Shen*, Dan Zhang, Qiao-li Lin, Lai-xin Shi, Qi-chuan Jiang, “Wetting of Polycrystalline α-Al2O3 by Molten Mg in Ar Atmosphere”, Metall. Mater, Trans. A, 41A (2010) 1621-1626.
7. Dan Zhang, Ping Shen*, Laixin Shi, Qichuan Jiang, “Wetting and evaporation behaviors of molten Mg on partially oxidized SiC substrates,” Applied Surface Science, 256 (2010) 7043–7047.
8. Feng Qiu, Ping Shen, Tao Liu, Qiaoli Lin and Qichuan Jiang, “Electronic structure and phase stability during martensitic transformation in Al-doped ZrCu intermetallics”, Journal of Alloys and Compounds, 2010, 491(1-2), 354-358.
9. Lei Zhan, Ping Shen, Qichuan Jiang, “Effect of nickel addition on the exothermic reaction of the Ti–C–BN system”, Int. Journal of Refractory Metals & Hard Materials 28 (2010) 324–329.
10. Ping Shen*, Zhongfa Yin, Jun Yang, Jianxin Sun, Zhonghao Jiang, Qichuan Jiang, “Wetting of Cu substrates with micrometer and nanometer grains by molten Sn-3.5Ag-0.7Cu alloy”, Surface and Interface Analysis, 2010, 42, 1681–1684.
11. Jun Yang, Ping Shen*, Zhongfa Yin, Jianxin Sun, Qichuan Jiang, “Wetting of microcrystalline and nanocrystalline Ni substrates by molten Sn-3.5Ag-0.7Cu alloy”, Materials Letters, 64 (2010) 2454-2457.
12. Lei Zhan, Ping Shen, Qichuan Jiang, “The mechanism of combustion synthesis of (TiCxNy-TiB2)/Ni from a Ni-Ti-C-BN system,” Powder Technology, 205(1-3) (2011) 52-60.
13. Lei Zhan, Ping Shen, Qichuan Jiang, “Effect of Al content on the combustion synthesis of (TiB2-Al2O3)/Al products from an Al-TiO2-B2O3 system”, Inter. J. Modern Phys. B Vol. 24, Nos. 15 & 16 (2010) 3203–3208.

2009年
1. Shenbao Jin, Ping Shen, Binglin Zou, Qichuan jiang, “Morphology Evolution of TiCx grains during SHS in an Al-Ti-C system;, Crystal Growth & Design, 2009, 9 (2), 646-649.
2. Qiaoli Lin, Ping Shen, Feng Qiu, Dan Zhan, Qichuan Jiang, “Wetting of polycrystalline B4C by molten Al at 1173-1473 K,” Scripta Mater., 60 (2009) 960–963. (通讯联系人)
3. Tao Liu, Ping Shen, Feng Qiu, Zhongfa Yin, Qiaoli Lin, Qichuan Jiang and Tao Zhang, “Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composites,” Scripta Mater., 60 (2009) 84–87.
4. Ping Shen, Weihua Sun, Binglin Zou, Lei Zhan, Qichuan Jiang, “Al content dependence of reaction behaviors and mechanism in combustion synthesis of TiB2-AlN-based composites”, Chem. Eng. J., 150 (2009) 261–268.
5. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Wettability of some refractory materials by molten SiO2-MnO-TiO2-FeOx slag,” Materials Chemistry and Physics, 2009, 114, 681–686.
6. Ping Shen, Qiaoli Lin, Qichuan Jiang, Hidetoshi Fujii, Kiyoshi Nogi, “Reactive wetting of polycrystalline TiC by molten Zr55Cu30Al10Ni5 metallic glass alloy,” J. Mater. Res., 2009, 24(7), 2420-2427.
7. Ping Shen, Wenya Li, Binglin Zou, Qichuan Jiang, “Role of Fe incorporation in the SHS reaction in an Al-Ti-B4C system,” J. Mater. Res., 2009, 24(6), 2066-2078.
8. Ping Shen, Dan Zhang, Xiaohong Zheng, Qiaoli Lin, Qichuan Jiang, “Wetting of polycrystalline W by molten Zr55Al10Ni5Cu30 alloy,” Materials Chemistry and Physics, 115 (2009) 322–327.
9. Ping Shen, Xiaohong Zheng, Qiaoli Lin, Dan Zhang and Qichuan Jiang, “Wetting of polycrystalline -Al2O3 by molten Zr55Cu30Al10Ni5 metallic glass alloy,” Metall. Mater. Trans. A, 2009, 40A, 444-449.
10. Binglin Zou, Ping Shen, and Qichuan Jiang, “Dependence of the SHS reaction behavior and product on B4C particle size in Al-Ti-B4C and Al-TiO2-B4C systems” Materials Research Bulletin 44 (2009) 499–504.
11. Binglin Zou, Shenbao Jin, Ping Shen, Qichuan Jiang, “Effect of reactant C/Ti ratio on the stoichiometry of combustion-synthesized TiCx in Ti-C system,” J. Ceramic Soc. Japan, 2009, 117(4), 525-528.
12. Feng Qiu, Ping Shen, Tao Liu, Dan Zhang, Qichuan Jiang, “The correlation between the formation of different martensitic structures and the cooling rates in ZrCuAlNiO alloy during solidification,” J. Alloy. Compd., 2009, 477, 840–845.
13. Tao Liu, Ping Shen, Feng Qiu, Qiaoli Lin, Shenbao Jin, Qichuan Jiang, “Microstructures and mechanical properties of ZrC reinforced (Zr-Ti)-Al-Ni-Cu glassy composites by an in-situ reaction,” Adv. Eng. Mater. 2009, 11(5), 392-398.
14. L. Zhan, P. Shen, S.B. Jin, Q.C. Jiang, “Combustion synthesis of Ti(C,N)-TiB2 from a Ti-C-BN system,” J. Alloy. Compd., 2009, 480(2), 315-320.
15. Lei Zhan, Ping Shen, Yafeng Yang, Jun Zhang and Qichuan Jiang, “Self-propagating high-temperature synthesis of TiCxNy–TiB2 ceramics from a Ti–B4C–BN system,” International Journal of Refractory Metals and Hard Materials, 2009, 27, 829–834.
16. Lei Zhan, Ping Shen and Qichuan Jiang, “Effect of BN/Ti ratio on the reaction synthesis of TiB2-TiNx ceramics”, International Journal of Modern Physics B, Vol. 23, Nos. 6 & 7 (2009) 1172–1178.
17. Xiaohong Zheng, Ping Shen*, Xianhe Han, Qiaoli Lin, Feng Qiu, Yefei Zhang and Qichuan Jiang, “Wettability and reactivity between B4C and molten Zr55Cu30Al10Ni5 metallic glass alloy,” Materials Chemistry and Physics, 2009,117, 377–383. (通讯联系人)
18. Laixin Shi, Ping Shen*, Dan Zhang, Qiaoli Lin, Qichuan Jiang, ;Wetting and evaporation behaviors of water-ethanol sessile drops on PTFE surfaces,; Surface and Interface Analysis, 2009, 41, 951–955. (通讯联系人)
19. 郑小红,沈平,Zr55Cu30Al10Ni5非晶钎料熔体与-Al2O3和ZrO2陶瓷的润湿性,焊接学报,30(11) 2009, 57-60.

2008年
1. Feng Qiu, Ping Shen, Zhonghao Jiang, Tao Liu, Qichuan Jiang, “Strong work-hardening effect in a multiphase ZrCuAlNiO alloy,” Appl. Phys. Letter., 92 (2008) 151912.
2. Ping Shen, Binglin Zou, and Qichuan Jiang, “Effect of TiO2 addition on the combustion synthesis in the Ti–B4C system,” J. Mater. Res., Vol. 23(5), 2008, 1327-1333.
3. Binglin Zou, Ping Shen, Zhongmin. Gao and Qichuan Jiang, “Combustion synthesis of TiCx-TiB2 composites with hypoeutectic, eutectic and hypereutectic microstructures,” J. Eur. Ceram. Soc., 28 (2008) 2275–2279.
4. Feng Qiu, Ping Shen, Tao Liu, Qichuan Jiang, “Effect of tempering on microstructure and mechanical properties in a multiphase ZrCuAlNiO alloy,” ISIJ Inter., 48(7) (2008) 984-987.
5. Zhiqiang Zhang, Ping Shen, Qichuan Jiang, “Differential thermal analysis (DTA) on the reaction mechanism in Fe-Ti-B4C system,” J. Alloy. Compd., 463 (2008) 498–502
6. Binglin Zou, Ping Shen, Shiqiang Yin and Qichuan Jiang, “Reaction behavior and mechanism during self-propagating high-temperature synthesis reaction in an Al-TiO2-B4C System,” Metall. Mater. Trans. B, 2008, 39B, 613-618.
7. Feng Qiu, Tao Liu, Zhonghao Jiang, Ping Shen and Qichuan Jiang, “Formation of a multiphase gradient structure in a Zr–Cu–Ni–Al–O alloy,” Adv. Eng. Mater., 2008, 10, No. 4, 384-388.

2007年
1. Ping Shen, Binglin Zou, Shenbao Jin, Qichuan Jiang, “Reaction mechanism in self- propagating high temperature synthesis of TiC-TiB2/Al composites from an Al-Ti-B4C system”, Mater. Sci. Eng. A 2007, 454–455, 300–309.
2. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Effect of temperature and surface roughness on the wettability of boron nitride by molten Al”, J. Mater. Sci., 2007, 42, 3564–3568.
3. Zhiqiang Zhang, Ping Shen, Yan Wang, Yunpeng Dong, Qichuan Jiang, “Fabrication of TiC and TiB2 locally reinforced steel matrix composites using a Fe-Ti-B4C-C system by an SHS-casting route”, J. Mater. Sci., 2007, 42: 8350–8356.
4. Binglin Zou, Ping Shen, Qichuan Jiang, “Reaction synthesis of TiC–TiB2/Al composites from an Al–Ti–B4C system,” J. Mater. Sci., 2007, 42:9927–9933.
5. Liu YH, Guo ZX, Shen P, Wang HY, Hu JD, “Study on densification of laser ignited reaction sintering of Ni-Al-Cu powder,” Science of Sintering, 2007, 39 (1):31-37.
6. Zou Bing-lin, Shen Ping, Jiang Qi-chuan, “Thermal explosion synthesis of aluminum matrix composites reinforced with TiC-TiB2 ceramic particulates,” Trans. Nonferrous Met. Soc. China, 2007, 17, s314-317. (SCI)

2006年
1. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Wettability of polycrystalline rutile titania by molten aluminum in different atmospheres,” Acta Mater., 2006, 54, 1559–1569.
2. Ping Shen, Masateru Nose, Hidetoshi Fujii and Kiyoshi Nogi, “Wettability of TiAlN films by molten aluminum,” Thin Solid Films, 515 (2006) 2009–2014
3. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Wettability of R single crystalline and polycrystalline -Al2O3 substrates by Al–Si alloys over wide composition and temperature ranges” J. Mater. Sci., 2006, 41, 7159-7164.

2005年
1. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Wetting, adhesion and diffusion in Cu-Al/SiO2 System,” Scripta. Mater., 2005, 52, 1259-1263.
2. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Effect of substrate surface orientation on the wettability and adhesion of -alumina single crystals by molten Cu at low oxygen partial pressures,” J. Mater. Res., 2005, 20(4), 940-951.
3. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Substrate orientation and wetting phenomena in Si/-alumina system at 1723 K,” J. Am. Ceram. Soc., 2005, 88(4), 912-917.
4. P. Shen, H. Fujii, T. Matsumoto, K. Nogi, “Influence of substrate crystallographic orientation on the wettability and adhesion of α-Al2O3 single crystals by liquid Al and Cu”, J. Mater. Sci., 2005, 40, 2329–2333.
5. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Intrinsic wettability and wetting dynamics in the Al/-Al2O3 system,” Ceramic Transactions, 2005, vol. 146,113-120.
6. Zuoxing Guo, Ping Shen, Jiandong Hu, Qizhi Dong, Hongying Wang, and Jing Yang, “Reaction laser sintering of Ni-Al powder alloys,” Optics & Laser Technology, 2005, 37(6), 490-493.
7. 郭作兴, 沈平, 胡建东, 王红颖,Cu-Al系粉末压坯激光反应烧结研究,激光技术,2005, 29(1), 11-13. (EI检索)


2004年
1. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Wetting and reaction of MgO single crystals by molten Al at 1073-1473K”, Acta Mater., 2004, 52(4), 887-898.
2. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Critical factors affecting the wettability of a-alumina by molten aluminum,” J. Am. Ceram. Soc., 2004, 87(11), 2151-2159.
3. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Reactive wetting of SiO2 substrates by molten Al”, Metall. Mater. Trans. A, 2004, 35A (2), 583-588.
4. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Wetting, adhesion and adsorption in Al-Si/ a-alumina system at 1723K”, Mater. Trans., 2004, 45(9) 2857-2863.
5. Ping Shen, Hidetoshi Fujii, Kiyoshi Nogi, “Effect of crystallographic orientation on wettability and adhesion in several representative systems”, J. Mater. Proc. Technol., 2004, 155-156, 1256-1260.

2003年
1. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “The influence of surface structure on wetting of a-alumina by Al in a reduced atmosphere,” Acta Mater., 2003, vol. 51(16), 4897-4906.
2. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Wetting of a-Al2O3 (0001) single crystals by molten Al”, Scripta Mater., 2003, vol. 48, 779-784.
3. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Reactive wetting of molten Al on different oriented -Al2O3 single crystals at high temperatures,” Scripta Mater., 2003, vol. 49, 563-569.
4. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Influence of MgO Crystal Surface Orientation on Its Wettability by Molten Al”, Trans. JWRI, 2003,32(2), 313-318.
5. Ping Shen, Hidetoshi Fujii, Taihei Matsumoto, Kiyoshi Nogi, “Wetting of -Al2O3 single crystals by molten Al”, Trans. JWRI, 2003, 32(1), 115-118.
社会兼职: 高温毛细力(High Temperature Capillarity, HTC)国际科学委员会委员
http://users.uoi.gr/sagat/htc/2-01-international.php

版权所有:吉林大学材料科学与工程学院 2017 ©

地址:吉林省长春市人民大街5988号  邮编:130022 电话:0431-85094375  E-mail:cailiao@jlu.edu.cn