[1] Investigation of the Microstructure and Mechanical Properties ofHeat-Treatment-Free Die-Casting Aluminum. .Materials, 2025, Vol.18, 1194 一作 [2] Enhancing shear performance of heat-treatment-free die-casting aluminumalloy joints with laser beam oscillation welding: An examination ofmicrostructure and mechanisms. Materials Letters Vol384, 2025, 138094 一作 [3] Control and optimization of defects in die casting of complicated rightcrankcase cover. Journal of Materials Research and Technology Vol.33 2024, 2831-2840 一作 [4] Effect of samarium on microstructure and mechanical properties of dilute Mg-Al-Ca alloys. Journal of Rare Earths,2025,已录用,一作 [5] Quasi-in-situ EBSD study of fast static recrystallization evolution of AZ61 alloy at twinning interactions during electric pulse treatment.Materials Characterization,2022.12.Vol.194 一作 [6] Substantial grain refinement of Al-Mn-Si alloys mediated by collaborative effect of Al-5Ti-1B refiner and sub-rapid solidification. Journal of Materials Processing Technology, Vol.187, 2024,230 - 23910 一作 [7] Precipitation phase diffusion kinetics of AZ61 alloy under electrical pulse treatment[J]. Materials Characterization,2022,191. 一作 [8] Constitutive modelling of plastic deformation behaviour for AA7075-H18 alloy based on hot forming and in-die quenching (HFQ®) process[J]. International Journal of Material Forming,2022,15(5). 通讯 [9] Quasi-in-situ electron backscattered diffraction investigation of twin-induced recrystallization during electrical pulse treatment in AZ61 alloy[J]. Materials Letters,2022,313.一作 [10] Refined microstructure and dispersed precipitates in a gradient rolled AZ91 alloy under pulsed current[J]. Materialia,2021,20.一作 [11] Enhanced Electroplasticity through Room-Temperature Dynamic Recrystallization in a Mg-3Al-1Sn-1Zn Alloy[J]. Materials,2021,14(13).一作 [12] Influence of Texture on the Mechanical Properties of a Mg-6Al-1Zn-0.9Sn Alloy Processed by ECAP[J]. Materials,2021,14(10).一作 [13] Excellent Ductility in the Extruded AZ61 Magnesium Alloy Tube Induced by Electropulsing Treatment during Tension[J]. Metals,2021,11(5).通讯 [14] Compressive creep behavior of extruded Mg-4Sm-2Yb-0.6Zn- 0.4Zr alloy,Materials Science and Engineering: A[J]. 2021, 809, 140929 通讯 [15]动车组变曲率L型截面铝合金门立柱拉弯精度控制[J].哈尔滨工业大学学报,2021,53(02):77-83.一作 [16] Effect of Pulsed Current on the Tensile Deformation Behavior and Microstructure Evolution of AZ80 Magnesium Alloy.[J]. Materials,2020,13(21).一作 [17] AZ31镁合金双曲率方杯拉深成形的有限元分析及工艺优化[J].吉林大学学报(工学版),2020,50(04).一作 [18]玄武岩纤维-碳纤维混杂平纹织物增强环氧树脂基复合材料的制备与力学性能[J].复合材料学报,2018,35(04):767-773.一作 [19]玄碳混杂增强树脂基复合材料混杂比优化设计[J].航空材料学报,2017,37(04):7-13.一作 [20] Stretch bending defects control of L-section aluminum components with variable curvatures[J]. The International Journal of Advanced Manufacturing Technology,2016,85(5-8).通讯 [21]中国标准动车组前端三维蒙皮件冲压成形[J].吉林大学学报(工学版),2017,47(03):869-875.通讯 [22] Stretch Bending of Z-section Stainless Steel Profile[J]. Journal of Iron and Steel Research International,2016,23(6).通讯 [17]双相钢DP780在循环加载-卸载过程中的非弹性回复行为及其微观机理[J].吉林大学学报(工学版),2017,47(01):191-198.通讯 [18]数控拉弯工艺中型材变形量的影响因素[J].吉林大学学报(工学版),2016,46(04).通讯 [19] Effect of Contact Pressure during Quenching on Microstructures and Mechanical Properties of Hot-stamping Parts[J]. Journal of Iron and Steel Research International,2015,22(12).通讯 [20] Numerical and Experimental Investigation on Hot Stamping of Ultra-High Strength Steel[J]. Advanced Materials Research,2014,3226(941-944).一作 [21]激光焊接速度对超高强度钢焊缝微观组织和显微硬度的影响[J].吉林大学学报(工学版),2012,42(03).通讯 [22]超高强度钢与低合金钢的激光搭接焊性能[J].吉林大学学报(工学版),2012,42(02).通讯 [23]汽车超高强钢防撞梁热成形试验[J].吉林大学学报(工学版),2011,41(S1).一作 |
